Medium-sized rotary tablet press machine
The single-pressure automatic rotary continuous tablet press developed by our factory can press granular raw materials into various ordinary and special-shaped tablets. It is mainly suitable for industrial sectors such as electronics, food, daily necessities, and pharmaceuticals. The outer shell is fully enclosed, made of stainless steel, and complies with GMP standards. Equipped with a transparent observation window, you can clearly see the working condition of the machine and can be fully opened, making it easy to see the inside and maintain it.
1. Turntable structure:
The turntable is the main implementation of the machine. It is composed of main parts such as upper and lower bearing assembly, spindle and turntable. The circumference of the turntable is evenly distributed on 17 stamping dies, and the torque is transferred between the turntable and the spindle by the flat key. The spindle is supported on the bearing, driven by the worm gear pair, connected by spline, rotate the spindle, so that the turntable rotates.
2. Track mechanism:
The orbit is composed of the cylindrical CAM and the surface CAM, which is the track of the movement of the upper and lower rods. The upper track is composed of many pieces of track, such as the upper rail, the lower rail, the parallel rail, the lower parallel rail and so on. They are respectively fastened on the upper rail tray. The lower track is composed of the upper punching down rail, the lower punching up rail and the filling rail. They are mounted separately on the lower rail seat.
3. Filling regulating device:
Filling regulation acts to regulate tablet weight. The filling regulating mechanism is installed inside the main body, and a moon-shaped filling rail can be observed on the plane of the main body. It rises or falls by the action of the spiral to control the filling amount. When the disk is rotated to adjust, the filling amount decreases clockwise, and increases conversely.
4. Tablet thickness (pressure) adjustment device:
The Tablet thickness (pressure) can be adjusted by adjusting the lower pressure wheel. The lower pressure wheel is installed in the groove of the main body, it is arranged on the eccentric shaft, and the outer end is connected with the hand wheel. When the external hand wheel is adjusted, the eccentric shaft drives the pressure wheel to rise or fall, that is, to adjust the thickness of the sheet (pressure). To control the thickness and hardness of the tablet. The upper pressure wheel can also be adjusted up and down as a regulating device, but not in general.
5. Feeding device:
The device is composed of feeding hopper, adjusting screw, feeder and so on. The feeder is a lunar grid feeder, which is installed on the turntable. The clearance between feeder and turntable working face and the height of hopper are adjusted according to the flow of particles.
6. Transmission device:
The transmission part of the machine is composed of motor, synchronous belt wheel and worm gear reduction box, test wheel and so on. The motor is mounted on the base plate. After the motor starts, the power is transferred to the worm gear pair through a pair of synchronous belts. The motor speed is regulated by ac frequency conversion step less speed regulation. Open the sides or the back door to directly observe these parts.
7. Cover :
The shell of the machine is completely closed, in line with GMP requirements. There are four Windows in the upper part of the city to facilitate cleaning and maintenance. The lower part is closed by a stainless steel door, which is normally locked and closed, and is only opened for maintenance and installation of the die. A console is mounted on the front of the machine. The press room and the transmission part of the machine are separated by a stainless steel enclosure to ensure the press room is clean and protect the transmission parts from powder pollution and corrosion.
| Product brand |
LOM Machine |
Number of punching dies |
17 |
| Tablet pressing pressure |
60 (thousand cattle) |
Tablet diameter |
20(mm) |
| Filling depth |
15(mm) |
Tablet thickness |
6(mm) |
| Turntable rotation speed |
30(rev/min) |
output |
30600(film/hour) |
| Motor Power |
380(V/Hz) |
Machine power |
3(kw) |
| Mainframe weight |
1000(kg) |
Overall dimensions |
890*650*1680(mm) |
Products will be sent in wooden boxes.
After the transaction is successful, you can choose to deliver by air, sea, or land. The specific method can be negotiated
LOM Machine Co., Limited.
Established in 2016 and develop dramatically, is a professional Manufacturing & Trading company that manufactures various filling production line and bottle blowing machines with customized solutions. We are focus on the liquid industry, our products have been exported to an extended market of USA, Europe, Southeast Asia and South America. And offices in USA and Germany are built up to provide more convenient service for our adorable clients.
Q1.What kind of after-sales service do you provide?
A:We have service outlets in almost every country and will provide customers with thoughtful door-to-door service. Even if the machine fails, there is no need to worry at all. Our after-sales service will make you very assured! We look forward to long-term cooperation with customers and grow together with customers.
1. One-to-one teaching by professional engineers
2. 24 hours online service
3. Engineers come to repair, give any help
4. Complete video teaching to ensure one step in place
Q2: What material does the machine use?
A:The machine uses 304 Stainless steel.Completely consistent with food inspection.
Q3:What's speed?
A: 30600(film/hour)
Q4: If the machine breaks in a problem we can't work out, what should I do?
A: At first, we will send a video on how to solve it. Second, We have professional Technicians who get Passports ready to travel around the world to adjust the machine for our customers.
Q5:Why chose us ?
A:LOM focus on improving the quality of the production and after-sale service. Our competition:Professional sales team and
technicians
1. Andvanced equipments and technology
2. Responsibility for our mistake
3. Efficient solution
4. Strict QC regulate
){kind=link}
){kind=link}